Filter
Top Products
5-9
Job Timeout
The job timeout function causes the printer to stop processing print data when it
takes more than a certain amount of time for the remaining data to be received by
the printer. When a job timeout occurs, the printer only prints the data it received up
to the timeout.
• 5 to 300 seconds (default: 30 seconds)
Set the job timeout between 5 and 300 seconds.
• OFF
Deactivates the job timeout function.
Panel Language
Use this to set what language appears on the control panel.
Auto Log Print
Set this to print logs automatically.
Look
1You cannot change this setting while the printer is processing print data.
✏ Note
Use the ‘4 Report/List’ menu to print logs.
• No (default)
The printer does not print logs automatically.
• Yes
The printer automatically prints a log after 22 print jobs.
ID Print
Use this to print the user ID in a particular location.
• OFF (default)
• Upper Left
• Upper Right
• Lower Left
• Lower Right
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500