Brother HL-5050 Printer User Manual


 
2
Federal Communications Commission (FCC) Declaration of
Conformity (alleen voor de VS)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911
USA
Telephone: (908) 704-1700
declares, that the products
Product name: Laser Printer HL-5030, 5040, 5050 and HL-5070N
Model number: HL-50
Product options: Lower Tray Unit LT-5000/DIMM
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Important
A shielded interface cable should be used in order to ensure compliance with
the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user's authority to operate the equipment.
Industry Canada Compliance Statement (alleen voor Canada)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Radiostoring (alleen voor modellen van 220-240 volt)
Deze printer voldoet aan EN55022 (CISPR Publication 22)/Klasse B.
Dit product mag uitsluitend worden gebruikt met een dubbel afgeschermde
twisted-pair kabel met de IEEE1284 certificatie. De kabel mag niet langer zijn
dan 2 meter.
Naleving van de bepalingen van het internationale
E
NERGY
S
TAR
®
-programma
Het doel van het internationale E
NERGY
S
TAR
®
-programma is het wereldwijd
bevorderen van de ontwikkeling en het gebruik van energiebesparende
kantoorapparatuur.
Brother Industries, Ltd. is een partner in het E
NERGY
S
TAR
®
-programma en
verklaart dat dit product voldoet aan de richtlijnen van E
NERGY
S
TAR
®
inzake
energiebesparing.
Laser Safety (alleen voor modellen van 100–120 volt)
This printer is certified as a Class I laser product under the U.S. Department
of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. This
means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot escape from
the machine during any phase of user operation.
Reguleringen
"EC" Conformiteitsverklaring
Producent
Brother Industries, Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
Fabriek
Brother Corporation (Asia) Ltd.,
Brother Buji Nan Ling Factory,
Golden Garden Ind., Nan Ling Village,
Buji Rong Gang Shenzhen, China
Verklaren hierbij dat:
Productomschrijving: Laserprinter
Productnaam: HL-5030, HL-5040, HL-5050, HL-5070N
Modelnummer: HL-50
voldoet aan de bepalingen in de van toepassing zijnde directieven: het
directief inzake Lage Spanning 73/23/EEC (zoals geamendeerd door
93/68/EEC) en het directief inzake Elektromagnetische Compatibiliteit
89/336/EEC (zoals geamendeerd door 91/263/EEC en 92/31/EEC en
93/68/EEC).
Toegepaste normen:
Geharmoniseerd:
Veiligheid: EN60950: 2000
EMC: EN55022: 1998 klasse B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2 : 1998
EN61000-3-3: 1995
Jaar waarin CE-certificatie voor het eerst was toegekend: 2002
Uitgegeven door: Brother Industries, Ltd.
Datum: 2 september 2002
Plaats: Nagoya, Japan
Handtekening:
Koichi Asai
Manager
Quality Audit Group
Quality Management Dept.
Information & Document Company