Filter
Top Products
For Network Users (For HL-5250DN)
28
3
Web browser
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
The User Name is ‘admin’ and the default
password is ‘access’. You can use a web browser
to change this password.
See Chapter 2 of the Network User's Guide.
4
Network default settings
To restore all network settings of the internal print
server to default, follow the steps below.
1 Turn off the printer.
2 Make sure that the front cover is closed and the
power cord is plugged in.
3 Hold down Go as you turn on the power switch.
All the LEDs will light up and then Status LED
will turn off. Release Go. Make sure that all the
LEDs turn off.
4 Press Go six times. Make sure that all the
LEDs light up to indicate the print server has
been reset to its default settings.
5
Print the Printer Settings
Page
The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page, press Go three times within 2
seconds.