Filter
Top Products
2001/10/02
CHAPTER 6 EPSON - 15
Select 7/72" line spacing
Esc1 (27)(49) <1Bh><31h>
• This command sets the line spacing to 7/72". All subsequent line feed operations will move the print
position 7/72" down the page.
• Since the printer resolution is 600 dots per inch the line spacing will not be exactly 7/72".
LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72".
Select n/72" line spacing
EscAn (27)(65)n <1Bh><41h>n
• This command sets the line spacing to n/72". All subsequent line feed operations will move the print
position n/72" down the page.
• Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly n/72".
• n must be in the range 1 to 85.
• If n is outside the range 1 to 85 the default line spacing, 1/6" is selected.
LPRINT CHR$(27); CHR$(65); CHR$(10); 'Set line spacing of 10/72".
Select n/216" line spacing
Esc3n (27)(51)n <1Bh><33h>n
• This command sets the line spacing to n/216". All subsequent line feed operations will move the print
position n/216" down the page.
• Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly n/216".
• n must be in the range 1 to 255.
LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216".
Perform n/216" line feed
EscJn (27)(74)n <1Bh><4Ah>n
• This command performs a single line feed, moving the print position down the page by n/216".
• This command does not perform a carriage return.
• The current line spacing setting is not affected.
• n must be in the range 0 to 255.
• The actual vertical distance moved may not be exactly the distance you specify due to the printer’s
600 dots per inch resolution.
LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed
Perform n/216" reverse line feed
Escjn (27)(106)n <1Bh><6Ah>n
This command performs a single reverse line feed, moving the print position up the page by n/216".
• This command does not perform a carriage return.
• The current line spacing setting is not affected.
• n must be in the range 0 to 255.
• The actual vertical distance moved may not be exactly the distance you specify due to the printer’s
600 dots per inch resolution.
LPRINT CHR$(27); CHR$(106); CHR$(108); '1/2" line feed