Brother HL Series Printer User Manual


 
1-28
3.
Open the Face up output tray.
Fig. 1-19
4.
Place envelopes in the Multi-purpose tray so they touch the back of the tray
and remain below the limit mark.
Fig. 1-20
Note
When you place paper in the Multi-purpose tray, note the following:
If you will be printing on paper that weighs more than 135 g/m
2
(36 lbs),
use the face up output tray.
Insert the leading edge of the paper first and push it gently into the tray.
The top of the paper stack must be under the guides that are on both
sides of the tray. The maximum thickness is 11 mm (or 0.43 inch).
The printed side must be face up.