Filter
Top Products
APPENDIX A A - 2
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external
telephone into the correct socket on the MFC, you can make your
MFC take the call by using the Fax Receive Code. When you press
the Fax Receive Code
51
, the MFC starts to receive a fax. (See
Fax Detect
on page 4-4.)
If the MFC answers a voice call and pseudo/double-rings for you to
take over, use the Telephone Answer Code
#51
to take the call at an
extension phone. (See
Setting the F/T Ring Time (Fax/Tel mode
only) on page 4-3.)
If you answer a call and no one is on the line, you should assume that
you’re receiving a manual fax.
■
Press
51
and wait for the chirp or until the MFC’s LCD displays
Receiving
, and then hang up.
Your caller will have to press Start to send the fax.
For Fax/Tel mode only
When the MFC is in Fax/Tel mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call.
Lift the external telephone's handset, and then press
Tel/R
to
answer.
If you’re at an extension phone, you’ll need to lift the handset during
the F/T Ring Time and then press
#51
between the pseudo/double
rings. If no one is on the line, or if someone wants to send you a fax,
send the call back to the MFC by pressing
51
.
Fax/Tel mode in the power save condition
Fax/Tel mode does not work in the power save condition. The MFC
will not answer telephone or fax calls and will keep ringing.
If you are at an external or extension phone, lift the handset of the
extension phone and talk. If you hear fax tones, hold the handset
until Fax Detect activates your MFC. If the other party says they want
to send you a fax, activate the MFC by pressing
51
.