Brother MFC-7420 All in One Printer User Manual


 
Setup Send
3 - 3
3
How to Fax
Faxing from the ADF
1 If it is not illuminated in green, press
(Fax).
2
Put the document face up in the ADF.
3
Dial the fax number.
Press Start. The MFC starts scanning
the document.
Faxing from the scanner glass
You can use the scanner glass to fax pages
of a book. The documents can be up to letter
size. Put the document face down on the
scanner glass.
Note
Since you can only scan one page at a time,
it is easier to use the ADF if you are sending
a multiple page document.
1
If it is not illuminated in green, press
(Fax).
2
Load your document on the scanner
glass.
3
Dial the fax number.
Press Start.
The MFC starts scanning the first page.
4
To send more than one page, press 1
and go to Step 5.
OR
To send a single page, press 2 (or press
Start again).
The MFC starts sending the document.
5
Place the next page on the scanner
glass.
Press Menu/Set.
The MFC starts scanning the page.
(Repeat Steps 4 and 5 for each
additional page.)
Automatic transmission
This is the easiest way to send a fax.
Do not pick up the handset of the external
phone or press Hook to listen for a dial tone.
Press Start immediately after dialing. (For an
example of automatic faxing, follow the steps
in Faxing from the ADF on page 3-3.)
Next Page?
1.Yes 2.No(Send)
Set Next Page
Then Press Set