Brother MFC-990CW All in One Printer User Manual


 
23
3
3
On/Off key 3
You can turn the machine on and off by
pressing the On/Off key.
Note
If you press the On/Off key while the
machine is in use it will finish the operation
before going into the Off mode.
If you have connected an external
telephone or TAD, it is always available.
Turning the machine off 3
a Press the On/Off key. The LCD will tell
you that you cannot use the phone once
it is switched off.
Press Yes.
The LCD shows Shutting Down and
will stay on for a few seconds before
going off.
Turning the machine on 3
a Press the On/Off key.
Power Off setting 3
You can customize the machine's On/Off
key. The factory setting is
Fax Receive:Off (MFC-790CW) and
Fax Receive:On (MFC-990CW). Your
machine will not work when it is switched off,
but it will clean the print head periodically. If
you turn this setting to Fax Receive:On,
you can receive faxes or calls even when the
machine is switched off. (See On/Off key on
this page.)
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
PwrOff Setting.
e Press PwrOff Setting.
f Press Fax Receive:Off or
Fax Receive:On.
(MFC-790CW) Go to step h.
(MFC-990CW) If you choose
Fax Receive:On, go to step g.
If you choose Fax Receive:Off,
go to step h.
g Press Ring Tone:On.
Make sure you set the Ring Volume to
Low, Med or High. (See Ring Volume
on page 26.)
h Press Stop/Exit.
Note
If you choose Ring Tone:Off, the
machine will not ring when you receive a
call.
General setup 3