Brother MFC-990CW All in One Printer User Manual


 
Chapter 6
58
Printing a fax from the
memory 6
If you have chosen paging or fax storage, you
can still print a fax from the memory when you
are at your machine. (See Memory Receive
(Black&White only) on page 50.)
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press Print Fax.
e Press Black Start.
f Press Stop/Exit.
Note
When you print a fax from the memory, the
fax data will be erased.
Remote Retrieval 6
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 6
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is inactive code (---l).
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Remote Access.
e Press Remote Access.
f Enter a 3-digit code using numbers 0-9,
l, or # using the buttons on the LCD.
Press OK.
(The preset ‘l’ cannot be changed.)
Note
Do not use the same code as your Fax
Receive Code (l 5 1) or Telephone
Answer Code (# 5 1). (See Using external
and extension telephones on page 73.)
g Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press in step f
to restore the inactive setting (---l) and
press OK.
Clear