Filter
Top Products
Sending a fax
13
3
NOTE
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
If you choose S.Fine or Photo and then
send a color fax (choosing Color in
Color Setting), the machine will send
the fax using the Fine setting.
Setting your changes as the
new default 3
You can store the fax options you use
frequently for Fax Resolution,
Contrast, Glass Scan Size, Preview,
Real Time TX and Color Setting by
saving them as the default settings. These
settings will remain until you change them
again.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b Press Options.
c Swipe up or down, or press a or b to
choose the setting you want to change,
and then press your new option.
Repeat this step for each setting you
want to change.
d After changing the last setting to your
preferred option, swipe up or down, or
press a or b to display
Set New Default.
e Press Set New Default.
f The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g Press .
Black & White
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than
Fine resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.