Filter
Top Products
23
Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
3
b Press Menu.
c Press a or b to choose Network.
Press OK.
d Press a or b to choose WLAN.
Press OK.
e Press a or b to choose Setup Wizard.
Press OK.
f When WLAN Enable ? is displayed, press a or b to choose On and press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using a or b.
Press OK.
h Enter the SSID name. (For information on how to enter text: uu Quick Setup Guide.)
Press OK.
i Using a or b, choose Infrastructure when instructed.
Press OK.
j Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose Open System, go to step k.
If you chose Shared Key, go to step l.
If you chose WPA/WPA2-PSK, go to step m.
k Choose the Encryption type None or WEP using a or b, and press OK.
Do one of the following:
If you chose None, go to step o.
If you chose WEP, go to step l.
l Enter the WEP key you wrote down in step a. Press OK. Go to step o. (For information on how to enter
text: uu Quick Setup Guide.)
m Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step n.