Filter
Top Products
11
Charging LED (Orange)
With the charging LED, the sta tus of the power sup-
ply can be checked.
The charging LED has two functions.
(1) Checking the charging status (when the AC adapter is con-
nected)
(2) Checking the battery level (while running off the lithium ion bat-
tery)
LED status Printer status
Constantly lit Charging
Off Finished charging
Flashing Malfunctioning battery
LED status Battery level
Off More than 60% charged
Flashes once Less than 60% charged
Flashes twice Less than 30% charged
Continues to flash 3 times Almost empty
• Please try to discharge the battery completely before recharg-
ing it, to increase battery lifetime.
• If the charging LED flashes while the printer is printing, imme-
diately connect the AC adapter and charge the battery. The
printer may stop printing.
• Due to the characteristics of batteries, even though the battery
is fully charged, using them in locations at low temperatures
greatly reduces the number of prints possible
.
• In
order to maintain the efficiency and life of the rechargeable
battery, remove the AC adapter from the printer when charging
is completed.
• In order to maintain the efficiency and life of the rechargeable
battery, do not place or use the printer in direct sunlight, near
heaters or other hot appliances, in any location exposed to
extremely high temperatures (e.g. on the dashboard or in the
back of your car).