Brother PJ-662 Printer User Manual


 
7
English
Do not spill water or drinks on the AC adapter/DC cable. In addition, do not use the AC adapter/DC
cable in a location where it may get wet, otherwise explosion or electric shock may result.
If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it
from the electrical outlet, and then wipe it with a dry cloth. If you continue to use a dirty power supply
plug, fire may result.
When disconnecting the AC power cord, do not pull on the cord, otherwise fire or electric shock may
result.
Do not insert foreign objects into the terminals of the AC adapter/DC cable, otherwise burns or
electric shock may result.
Use the AC adapter/DC cable correctly and observe the following precautions, otherwise fire or
electric shock may result.
Do not damage the AC adapter/DC cable.
Do not modify the AC adapter/DC cable.
Do not twist the AC adapter/DC cable.
Do not severely bend the AC adapter/DC cable.
Do not pull on the AC adapter/DC cable.
Do not place objects on the AC adapter/DC cable.
Do not subject the AC adapter/DC cable to heat.
Do not bind the AC adapter/DC cable.
Do not allow the AC adapter/DC cable to be pinched.
If the AC adapter/DC cable is damaged, request a new one from the sales representative where the
printer was purchased.
Keep the AC adapter/DC cable out of the reach of children, particularly infants, otherwise injury may
result.
Do not use the AC adapter/DC cable near microwave ovens, otherwise damage to the AC
adapter/DC cable or printer may result.
Do not use the AC adapter/DC cable near flames or heaters. If the covering of the AC adapter/DC
cable cord melts, fire or electric shock may result.
WARNING