Brother WL-660 Series Printer User Manual


 
9
English
NOTE
The Setup program automatically updates Windows SYSTEM.INI file by adding
DEVICE=bi-di.386 under the [386Enh] section. If any bi-directional parallel
communications device driver has been previously installed, it will be deactivated by this
new driver. If you want to use the previous driver, you should first install this driver, then
re-install the previous one, which will make this driver inactive.
The Setup program makes the installed printer driver default.
The Setup program automatically sets the printer port to the parallel interface, LPT1.
The Setup program adds changes to the SYSTEM.INI file. It is necessary to restart
Windows so that the changes become effective and the installed bi-directional parallel
communications device driver can take effect.