Filter
Top Products
5
The User name and password field will open.
Enter “root” as the User name
Leave the password field blank.
Click OK to enter the configuration page.
Step
ẇ
Configure the AirStation
For more information about configuring and operating your 54Mbps Wireless
Compact Bridge Base Station and Client Manager, refer to the Buffalo
Support Web Site: http://www.buffalotech.com/wireless/support
If at any time you wish to restore settings to factory defaults, press the red INIT
button on the rear of the AirStation for several seconds until the LED lights flash
off.
Once configuration is complete, connect the AirStation to your Local Area
Network for normal operation.
From this screen,you can access the
built-in Web configuration feature
that will allow you to configure the
AirStation for your Local Area
Network.
Advanced configuration settings are
available by clicking the advanced
button.