Cables to Go 1000TA/TPC Network Card User Manual


 
Asanté FriendlyNET™ GigaNIX™ 1000TA/TPC 35
Product Specifications
Connector: Gigabit Ethernet (1000BaseT, 100BaseTX, 10BaseT):
RJ-45
Drivers: Apple Mac OS 9 and OS X
1
Microsoft Windows 98, 98 Second Edition and Me
Microsoft Windows NT and 2000 Professional
Linux
See the Asanté website for the latest drivers
Status Indicators: 1000 Mbps Link/Activity, 100 Mbps Link/Activity and
10 Mbps Link/Activity
Bus Interface: PCI v2.2 bus master, 32/64-bit, 33/66 MHz
Dimensions: 2.5 x 6.4 inches (63 x 163 mm)
Performance
Throughput: Sustained 1 Gbps over PCI bus
Burst Rate: Up to 256 dwords (1024 bytes) over PCI bus
Host Offloading: IPv.4 checksum and optional statistics gathering for
RFC 1213 (MIB II), RFC 1398 (Ether-like MIB), IEEE
802.3 LME
Optional: Jumbo packets, 802.3x full duplex flow control with
automatic pause,
802.1D and 802.1Q priority with multiple priority
queues
Link Quality Monitor: AsantéQ continuously adapts to actual line conditions
by managing echo and crosstalk cancellation,
equalization, timing and skew compensation.
Automatic Gain Control maximizes signal strength
Environmental Range
Operating Temperature: 32º to 131ºF (0º to 55ºC)
Relative Humidity: 10% to 90%, non-condensing
Power: Maximum 7W
Standards Compliance
Network: IEEE 802.3u Auto Negotiation and parallel detection
IEEE 802.3ab Gigabit Ethernet over 4 pairs of UTP
Category 5 (1000BaseT); Asanté Certified Gigabit
Ethernet Cable or EIA/TIA-568A Category 5E
recommended.
IEEE 802.3u Fast Ethernet over 2 pairs of UTP
Category 5 (100BaseTX).
IEEE 802.3 Ethernet over 2 pairs of UTP Category 3
(10BaseT).