Cables to Go TE100-S55 Switch User Manual


 
54
Appendix G Hardware Specifications
SWITCH SPECIFICATION
Complies to IEEE 802.3 CSMA/CD 10Base-T, 100Base-TX,
100Base-FX Ethernet Standards
Complies to IEEE 802.1d Spanning Tree, IEEE 802.2 LLC,
and ISO 8807-3 standards
Switched IEEE 802.3 MAC layer frame size: 64-1518
NWAY Auto-negotiation for each network port providing
auto-detection of connected cable type, auto-sensing of full
or half duplex signaling and auto-configuration
Store-and-forward packet switching
Native SNMP management support with Ethernet
MIB II (RFC 1284) and bridge MIB (RFC 1286)
VLAN support
4,096 maximum entries for MAC Address Table
Comprehensive LED display of the system/port status
128KB EEPROM (flash memory) for firmware upgrade
One RS-232D (DB-9) port for Out-of-Band management
(asynchronous, 8-bit data, 1 stop bit, no parity, 19.2K baud)
Rack mountable (Fits standard 2U EIA 19” rack)
Five 10/100Mbps LAN ports built-in
Optional slot for add-on modules
P
ORT SPECIFICATION