Filter
Top Products
Introduction
1-2
interfaces provide frames filtered, frames forwarded, and all Spanning Tree
Protocol parameters. The 9F310-02 and 9F315-02 modules support the IETF FDDI
MIB (RFC-1512), IETF MIB ll (RFC-1213), IETF BRIDGE MIB (RFC-1493), and a
host of Cabletron enterprise MIBs. In addition, the front panel provides LEDs for
FDDI link status per port as well as transmit and receive activity.
Connectivity
The 9F310-02 and 9F315-02 modules have one interface to the INB-1, two front
panel FDDI interfaces, or two FNB interfaces to the MMAC-Plus FNB backplane.
The front panel A/B port connections are via standard fiber FDDI MIC
connectors. The INB-1 interface is fixed, however, and the two FDDI interfaces
can attach to one or both of the front panel connectors, one or both of the FNB
interfaces (FDDI-1 or FDDI-2), or one of each.
Management Information Base (MIB) Support
Both 9F310-02 and 9F315-02 provide MIB support including:
• IETF FDDI MIB
• IETF MIB II
• IETF Bridge MIB
• a host of Cabletron Enterprise MIBs.
LANVIEW LEDs
The 9F310-02 and 9F315-02 use LANVIEW – the Cabletron Systems built-in visual
diagnostic and status monitoring system. With LANVIEW LEDs, you can quickly
identify the device, port, and physical layer status at a glance.
For a complete list of supported MIBs, refer to the release notes provided in
the 9F310-02 and 9F315-02 package.
NOTE