Filter
Top Products
11
9F426-03 Module Specific Information
Full Duplex Configuration Screen Fields
The following information briefly explains each Full Duplex Configuration Screen
field.
OPERATION MODE (Toggle)
Lets you determine whether the specified port will transmit and receive data
separately or simultaneously. You can set this field to one of the following values:
• FULL DUPLEX - The port can transmit and receive data at the same time.
Therefore, the port is running at 200 Mbps.
• STANDARD FDDI (default) - The port can either transmit data or receive data,
but not both at the same time. Therefore, the port is running at 100 Mbps.
LINK STATUS
Indicates whether there is a physical connection from this port to another device.
One of the following values appears:
• Link - There is a link signal present; there is a valid physical connection from
this port to another device.
• No Link - There is no link signal present; there is no valid physical connection
from this port to another device.
PORT STATUS
Indicates whether the port has been turned on or off administratively. You will see
one of the following values:
• ENABLED - The port is turned on administratively.
• DISABLED - The port is turned off administratively.
SET ALL PORTS (Toggle)
Allows you to set all the FDDI ports to either FULL DUPLEX or STANDARD
FDDI at one time.
• FULL (default)
• STANDARD