Cabletron Systems STH-24 Switch User Manual


 
1-1
Chapter 1
Introduction
The 9T122-24 MicroLAN™ Switch Module, shown in Figure 1-1, is a three port
Token Ring bridge and router module. This module supports either one token
ring with 24 HUB connections, or two separate Token Rings with 12 HUB
connections, and an interface to the FNB backplane.
Features
Processor
The 9T122-24 is equipped with an advanced Intel i960 microprocessor. This
microprocessor provides a platform for all management functions within a
scalable RISC-based architecture.
System Management
Interfaces to the two System Management Buses (SMB-1 and SMB-10) for
intermodule management.
Connectivity
The 9T122-24 provides 24 RJ-45 Trunk Coupling Unit (TCU) lobe connectors. The
connectors may be configured as one 24-port ring (
default
) or two 12-port rings.
Bridging/Routing
Bridging/Routing between the front panel Token Ring connections and/or to any
other module in the chassis via FNB-1 or FNB-2 of the FNB bus. The module is
capable of Transparent Bridging or Source Route Bridging. IEEE 802.1d Spanning
Tree Protocol is supported in all bridging functions. Translational bridging
between Source Routing and Transparent Frames types is also performed.