Filter
Top Products
CONNECTING TO THE NETWORK
Page 4-12
Figure 4-7. The EPIM-X
4.2 FINISHING THE INSTALLATION
The SEH is now ready for operation. Before placing the network into
service, test the installation thoroughly, making sure that you can
address all stations and that the SEH and all stations are indicating
normal operation. Ensure that the networking software is configured
properly to match the installed network. If you encounter errors or
abnormal operation, proceed to Chapter 5, Troubleshooting.
OFF Position
(Toward Front
of EPIM)
ON Position
(Toward Back
of EPIM)
OFF
ON