Filter
Top Products
Fax (D1180/D1170/D1150)
6-63
Checking/Changing the Status of Fax Documents in Memory
2
Press or to scroll through the job
list.
0 1 2 X X X X X X X
5 0 0 3 1 5 : 5 5 R X T R M . . .
If you want to delete a job, go to the next step.
Otherwise, press
[Stop/Reset] to return to the
standby mode.
3
Press or to select the job you
want to delete, then press [OK].
1 2 3 X X X X X X X
5 0 0 1 1 5 : 5 3 R X S T N D B Y
If you select <JOB CANCEL> in step 1, skip to
step 5.
4
Press or to select <CANCEL>,
then press [OK].
C A N C E L
5 0 0 1
You can forward the selected job to another
destination by selecting <FORWARD>. For
information on forwarding received documents,
see “Sending Documents in Memory to a Different
Destination,” in the e-Manual.
5
Press to select <YES>.
< Y E S N O >
C A N C E L ?
If you do not want to cancel the job, press to
select <NO>.
6
Press [Stop/Reset] to return to the
standby mode.
For the D1180/D1170, you can check for the
arrival of I-faxes at any time if you select <I-FAX>
in step 1. To be able to check the arrival of I-fax
using [Job Cancel/Status Monitor], you must
first set <POP> (Post Office Protocol) to <ON> in
<E-MAIL/I-FAX> in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
Checking the Fax Log
You can view the results of fax transactions that list
all faxes sent or received.
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM
SETTINGS>, the job log does not appear in the display.
1
Press [Job Cancel/Status Monitor]
repeatedly to select <TX/RX LOG>, then
press [OK].
T X / R X L O G
2
Press or to view the required
transmission/reception result.
0 1 2 X X X X X X X
0 0 0 1 1 5 : 5 0 T X O K
3
Press [Stop/Reset] to return to the
standby mode.
You can also check the results of fax transactions
(transmission or reception) by printing the TX
report, RX report, or Activity report. For details, see
“Printing Reports Automatically,” in the e-Manual
and “Printing Reports and Lists Manually,” in the e-
Manual.