Filter
Top Products
9
ENGLISH
Flow of installation
Flow of installation
To use the projector via the networks, follow the setup procedures below.
STEP 1
Connect the LAN and set the configuration.
STEP 2
Network Configuration has completed.
Decide depending on the LAN environment.
➔ “2. Setup Procedures” (pp.11–16).
Detailed LAN configurations need to be done with a browser later.
First, complete the Wired LAN connection between computers and projec-
tors, then start browser configurations.
➔ “3. Basic setting and operation” (pp.17–30).
Follow each chapter to operate the projector.
■ Operate and manage the projector ➔ “4. Controlling the projector” (pp.31-43)
➔ “Power Control and status check” (p.32)
➔ “Control” (p.34)
➔ “PC adjustment” (p.38)
➔ “Setting up the projector” (p.39)
➔ “Projector information” (p.42)