Filter
Top Products
15
Specifications
*1
Available only when scanning films.
*2
USB 2.0 Hi-Speed mode/IEEE1394 (FireWire) mode. Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.
CanoScan 9900F
Scanner Type Flatbed
Scanning Element CCD 6-line color
Light Source Cold cathode fluorescent lamp
Optical Resolution 3200 x 6400 dpi
Selectable Resolution 25 - 9600 dpi (ScanGear CS)
Scanning Bit Depth
Color 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 16 bit
*1
or 8 bit output
Scanning Speed
*2
(Photo or Document)
Color 8.64 msec./line (1600 dpi), 8.64 msec./line (3200 dpi)
Grayscale,B&W 8.64 msec./line (1600 dpi), 8.64 msec./line (3200 dpi)
Scanning Speed
*2
(Film)
Color, GrayScale,
B&W
2.16 - 146.88 msec/line
Preview Speed
*3
Approximately 3 sec.
Interface
USB 2.0 Hi-Speed
USB (USB 1.1 equivalent), IEEE1394 (FireWire)
Maximum Document Size A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
Film Type/Number of Frames
35 mm strip (negatives/positives)/24 frames
35 mm slide (negatives/positives)/8 frames
120 format (negatives/positives)12 x 6 cm
4”x 5” format (negatives/positives)
Scanner Buttons 4 buttons: COPY, SCAN, FILE, E-MAIL
Operating Range
Te m per a t u re
10
°C to 35°C (50°F to 95°F)
Humidity
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Power Requirements
AC adapter (100/120/230/240 V)
*4
Power Consumption
In operation: 19.5 watts maximum
Stand-by: 6 watts
Power Switch Off: 0.1 watt
(Using supplied AC adapter)
Maximum Exterior Dimensions 290 x 509 x 127.3 mm (11.4 x 20 x 5 in.)
Weight Approximately 5.2 kg (11.5 lbs.)
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).