Filter
Top Products
2-14
Registering coded speed
dialing numbers and names
Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone
number can be registered under each two-digit speed dialing code and you can register up to 70
locations. You can also register the name of the party and a voice tag; the name appears on the
printout of the coded speed dialing list.
1
Press [Function].
2
Use [ ] or [ ] to select TEL REGISTRATION.
Press [Start/Copy].
3
Use [ ] or [ ] to select CODED SPEED DIAL.
Press [Start/Copy].
4
Use [ ] or [ ] to select the two-digit code (01-70) under which you want to register the
number.
If a number is already registered under this coded speed dialing code, the number is displayed on the
LCD.
5
Enter the party’s number and name the same way you registered them for one-touch
speed dialing.
See steps 5 to 6, Registering one-touch speed dialing numbers and names, p. 2-12.
6
Register the party’s voice tag the same way you registered it for one-touch speed dialing
(see p.2-13).
7
To assign additional coded speed dialing numbers, start from step 4.
To finish, press [Stop].
To delete the name and number registered under the coded speed dialing code, press [Clear] and
[Start/Copy] after you perform steps 1 to 4 above.
1-TOUCH SPD DIAL
01=
03=81 773 xxxx_