Canon C5870U Copier User Manual


 
Punch Waste Tray Capacity: Approximately 3,000 Sheets
Punch Waste Tray Access: Front
Power Source: From Finisher-R1 or
Saddle Finisher-R2
Dimensions (H x Wx D): 32-3/4" x4-1/4" x 24-1/4"
(833mm x 107mm x 615mm)
Weight: Approximately 15.9 lb. (7.2kg)
Side Paper Deck-U1
Number of Drawers: 1
Paper Capacity: 3,500 Sheets (20 lb. Bond)
Paper Size: Letter
Paper Weight: 17 lb. Bond to 110 lb. Index
Power Source: From Main Unit
Dimensions (H x Wx D): 22-3/8" x12-7/8" x 23"
(569.5
mm x 326mm x 583mm)
Weight: Approximately 101 lb. (46kg)
Color UFR II/PCL/PS Printer Kit-LI
Processor: Canon Custom Processor—Shared
RAM:
1GB (St
d./Max.)—Shared
Hard Disk: 80GB—Shared
PDLSupport: PCL 5c, PostScript
®
3
TM
Emulation, UFR II
Interface Connections: 10/100Base-T (RJ-45), USB 2.0
Network OS: Windows
®
98/Me/2000/XP
Windows NT
®
4.0/Server 2003
Solaris
TM
1.1x, 2.5x, or later,
Mac OS9.1 or later (PPD),
M
ac OSX (10.1.5 or later),
No
v
el
l NetWare v.3.2, 4.1, 4.11,
4.2, 5, 5.1, 6, 6.5 (IPX/SPX
TM
)
Print
Ser
v
ic
e
NetWare: NDSPserver, Bindery Pserver,
Nprinter, Rprinter
TCP/IP: LPD/LPR, RAW (Port 9100),
IPP 1.1, SMB, FTP
Ap
p
l
eT
alk:
P
AP (PostScript)
Print
er Driv
er
s
UFR II:
W
indo
w
s
2000/XP
WindowsServer 2003
Citrix MetaFrame
M
ac
intosh OS X (10.1.5 or later)
PCL 5c: Windows 98/Me/2000/XP
Windows NT 4.0/Server 2003
C
itri
x
MetaFrame
PS 3 Emulation: Windows 98/Me/2000/XP
Windows NT 4.0/Server 2003
Citrix MetaFrame
Macintosh OS X (10.2 or later)
imagePASS-G1
Type: External Piggy-Back Controller
Processor: Intel
®
Celeron
®
M 1.2GHz
RAM: 256MB (Std.), 512MB (Max.)
Hard Disk: 80GB
PDLSupport: Adobe PostScript 3, PCL 5c
Interface Connections: 10/100/1000Base-T (RJ-45)
Internal Fonts
PS: 136 Fonts (117 Adobe
®
Type
and 19 TrueType
®
)
PCL 5c: 113 Roman
ProtocolStacks: Ethernet
IPX/SPX: 802.2, 802.3, Ethernet II,
Ethernet SNAP
TCP/IP: EthernetII
AppleTalk: Ethernet SNAP
Network OS: Novell NetWare v.5.x or later
5.1/6.0 (IPX/SPX)
Windows 98/Me/2000/XP/ Server
2003 (TCP/IP), Solaris 2.5.1 or
later, MacOS 9.2 or
l
at
er, Mac OSX 10.2.4 or later
Dimensions (H x Wx D): 13" x11-1/4" x 3-1/2"
332mm
x
287mm x 90mm
Weight: 10.9 lb. (5kg)
Power Requirements: 100 to 240V, 50/60Hz, 2A
Power Consumption: 35W
Additional Functions: Color NetworkScanGear
Fiery
®
Tools: WebTools
TM
, Command
W
orkSt
ation
®
, Fier
y
Downloader
TM
,
Fier
y
R
emot
e
Scan, ColorWise
®
Pr
o
Tools (Calibrator, Color Editor,
Profile Manager, Color Setup,
S
pot-On
®
)
Optional: EFI Densitometer ED-100, Impose,
Sec
ure Erase
Super G3 FaxBoard-U1
Applicable Line: Public Switched Telephone
Network (PSTN)
C
onnection Line
s:
One
Sendin
g/O
rigin
al
Siz
e:
Statement to 11" x 17"
(from Document Feed)
Recording/Printing Size: Statement to 11" x 17"
Other Optional Accessories and Utilities
• AccessibilityHandle-A1
• Barcode Printing Kit-A1
• Braille LabelKit-A1
• Card Reader-C1
• Card Reader Attachment-C1
• Card Sets
• Cassette-AA1
• Copy Tray-K1
• Document Tray-K1
• eCopy Suite
• imageRUNNER Security Kit-A2
▲▲
• imageWARE
TM
Suite
• KeySwitch Unit-A2
• NetSpot Suite
• Stamp Unit-A1
• PDF High Compression Kit-A1
• R
emot
e Operator’sSoftware Kit-A1
• Security Expansion Board-E1
• UniversalSend PDF EnhancementKit-C1**
• Voice Guidance Kit-A2
• Web AccessSoftware Kit-D1
▲▲▲
* During printing, the engine may occasionally pause
for internal adjustment.
** Requires PDF High Compression Kit-A1.
***
Requires Universal Send PDF Enhancement Kit-C1.
70 ipm @ 300 x 300 dpi available only for Send and
Scan modes.
††
Available on Saddle Finisher-R2 only.
†††
Use of Additional Finisher Tray-A1 will alter top tray capacity
when outputting Letter/Statement-R/Executive documents.
Puncher Unit-M1can only be installed with either the
Finisher-R
1or Saddle Finisher-R2.
▲▲
Requires Security Expansion Board-E1.
▲▲▲
Requires Color UFR
II/PCL/PS Printer Kit-L1 if printing PDF files.
Additional Finisher Tray-A1
Saddle Finisher-R2 Finisher-R
1 Puncher Unit-M1
Copy Tray-K1
Main Unit Side Paper Deck-U1