Filter
Top Products
7
Set Up the Paper Cassette and Load Paper
1
Insert the output tray into the front slot on the
machine.
2
Pull out the paper cassette completely.
CAUTION
Pull the paper cassette straight/forward. Pulling it at an
angle may damage the paper sensing lever inside the
machine.
3
Attach the cassette extension to the paper
cassette. The slots (A) are keyed and must be
inserted at a 90° angle. Once inserted, fold the
extension (B).
4
Pinch and slide the rear paper guide (A) to match
the size of paper (B).
NOTE
Confirm that the rear paper guide is fitted in the paper
size slit correctly.
NOTE
To load Legal-size paper, pull the blue tab (A) and extend the paper cassette (B) as far as it will go. Keep the rear paper guide
to LGL-size mark.
5
Fan the paper stack and even the edges.
6
Load the paper into the paper cassette with the
print side down. Make sure the paper stack sits
below the hooks (A) on the rear paper guide.
A
A
B
A
B
A
B
A
8