Canon W7250 Printer User Manual


 
Using the Operation Panel
10
5-10
Menu Settings Summary Tables
The menus provide the functions listed and described in the tables below.
Settings marked with an asterisk (*) in the tables are the initial or default
values.
Main Menu
Menu Item Available Settings Function
Head Cleaning
Head Cleaning A Cleans the printhead.
Head Cleaning B Re-fills the printhead with ink.
Force Cutting
*1
Yes*, No
Cuts the roll media at the current position
under the cutter. However, when the media
is within 10 cm (4 in.) of the leading edge,
the media is cut after it loads as far as the 10
cm (4 in.) position
.
Auto Feed
*2,3
Yes*, No.
Selects automatic feed for the Media
Take-up Unit.
Take-up Reel
*3
Disable*, Enable
Sets the operation for the Media Take-up
Unit. When “Enable” is selected, the cutter
is automatically switched off
.
Cut Sheet Type
*4
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Semi-Glossy,
Glossy Film, Back Print Film,
Proof, Special 1
~5
Selects the type setting for cut sheet
media.
Roll Media Type
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Semi-Glossy,
Glossy Film, Back Print Film,
Proof, Special 1
~5
Selects the type setting for roll media.
Rep. Ink Tank No*, Yes
Sets the printer in the replace ink tank
mode.
Auto Cut
*5
Yes*, Print Cut Line, No
Selects automatic cutting when
printing with roll media. If you select
“Print Cut Line”, a line prints to guide
manual cutting.
System Setup
Cutter Enable*, Disable
Switches the roll media cutter on and
off.
Buzzer On*, Off
Switches the buzzer function off and
on. When the buzzer is on, it buzzes
when an error occurs.