Filter
Top Products
Loading the Tray
15
2-15
Important
Note
Note
Loading the Tray
This is the general procedure for loading the tray:
• Start the print job on the computer.
• Remove printed sheets from the output tray.
• Set the media in the tray.
• Press the Online button.
• After printing, remove all remaining sheets from the tray.
• Press the Online button.
z Store unused paper and other media in its original package. Store the package in a
cool, dry location that is not exposed to sunlight.
z Some types of media may not feed smoothly.
z Skew may occur when feeding paper manually from the tray. If this occurs, remove
all of the paper from the paper cassette and print.
1
From the computer, select Manual for the Media Source.
The operation panel displays “Load Media”, enters the standby mode, and
waits for you to load the media.
z If you press the Online button before you load the media in the tray, paper will feed
from Cassette 1. If Cassette 1 is not loaded, the operation panel displays “No
Media: Manual”, enters the standby mode, and waits for you to load the media.
Load Media
A4
00_J80xUG_Eng.book Page 15 Friday, April 12, 2002 12:28 AM