Canon MP180 All in One Printer User Manual


 
Select Easy Install in order to install the application software, On-screen Manual and MP drivers.
Select Custom Install in order to choose the options you would like to install.
This sheet explains Easy Install only.
IMPORTANT
Close any open software applications, including virus checkers, prior to installing the software.
The following software programs are included on the Setup CD-ROM:
IMPORTANT
Do not connect the USB cable until Step 4, “Connect the USB cable.”
Before installing the software in Windows XP or Windows 2000, you must log on as Administrator
or a user with Administrator privileges.
Step 1: Prepare the Setup CD-ROM and get ready to install.
1 Turn OFF the machine.
2 Turn ON your computer, and start Windows.
3 Insert the Setup CD-ROM into the CD-ROM drive.
The setup program should automatically run. If the setup program does not automatically run, click
[My Computer], then double-click the CD-ROM icon.
IMPORTANT
If the following screen appears, the USB cable is
connected.
z Perform the following steps.
1. Turn OFF the machine.
2. Disconnect the USB cable.
3. Click [Cancel].
Step 2: Select the language and place of residence.
In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be
displayed. Go to Step 3.
Step 3: Install the software.
To install Adobe RGB (1998), click Custom Install and follow the instructions on the screen.
Adobe RGB (1998) cannot be installed in Windows Me and Windows 98
Step 4: Connect the USB cable.
1 When the [Printer Connection] appears, connect the machine to the computer
with the USB cable.
2 Turn ON the machine.
3 Click [Exit].
If prompted to, restart your computer.
US only
When the Registration window appears, follow the on-screen instructions to ensure product support.
The serial number is located inside the machine. (See “Install the FINE Cartridge.” on the reverse side of
this sheet)
The following software programs are included on the Setup CD-ROM:
IMPORTANT
Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not
supported.
Step 1: Turn ON the machine, and connect the USB cable.
Step 2: Prepare the Setup CD-ROM.
1 Turn ON your computer, and start Mac OS X.
2 Insert the Setup CD-ROM into the CD-ROM drive.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
3 Double-click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD-
ROM and click [File] menu and then select [Open].
Step 3: Enter the name and password for an Administrator Account.
1 Enter the name for the Administrator.
2 Enter the password and then click [OK].
Step 4: Select the language and place of residence.
In some countries, the [Select Language] and [Select Your Place of Residence] dialog boxes will not be
displayed. Go to Step 5.
Step 5: Install the software.
US only
When the Registration window appears, follow the on-screen instructions to ensure product support.
The serial number is located inside the machine. (See “3 Install the FINE Cartridge.” on the reverse side of
this sheet)
* When connecting from Mac OS X v.10.3.3 or earlier:
Restarting the computer while connected to the machine may cause the machine not to be detected. To
resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back
ON again.
z Perform the following to make sure the driver has been installed correctly.
1. Select [Applications] from the [Go] menu.
2. Double-click the [Printer Setup Utility] ([Print Center] when using Mac OS X v.10.2.8) icon.
If the printer is displayed in the [Printer List], the printer driver is installed.
If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select
[USB] from the pop-up menu. Select your machine from the [Product] list and click [Add].
You can set the scan operation to start with the Operation Panel of the machine. For details, see the User's
Guide.
You now have completed installation of the software.
On-screen Manual MP Drivers MP Navigator
Easy-PhotoPrint Easy-WebPrint ScanSoft OmniPage SE
ArcSoft PhotoStudio
My Printer
*
* This may not be available depending on the country of purchase.
1 Select the language to use with this
CD-ROM and then click [Next].
2 Select your place of residence and
then click [Next].
1 Click [Easy Install], then click [Install].
To read descriptions of the software programs, set the mouse on the item.
2 Read the License Agreement, then click [Yes].
Installation begins. Follow the displayed instructions.
Click
Click
Click
Click
Click
Click
On-screen Manual MP Drivers MP Navigator
Easy-PhotoPrint
ScanSoft OmniPage SE
*
ArcSoft PhotoStudio
*
This may not be available depending on the country of purchase.
1 Select the language to use with this
CD-ROM and then click [Next].
2 Select your place of residence and
then click [Next].
1 Click [Easy Install], then click [Install].
To read descriptions of the software programs, set the mouse on the item.
2 Click [Yes].
Installation begins. Follow the displayed
instructions.
3 Click [Restart] to restart your
computer.
Enter
Click
Click
Click
Click
Click
Click
Click