Canon CR-50 Scanner User Manual


 
18
IMPORTANT
Make sure that the ink cartridge lock lever locks the ink cartridge
into the correct position.
7
Squeeze the Print Position Adjustment Lever and move it
to adjust the print position.
Top:
50.5 mm (1.99") from the bottom edge of the document
Middle:
47 mm (1.85") from the bottom edge of the document
Bottom:
43.5 mm (1.71") from the bottom edge of the document
If the ink head drops back when installed, the two ink cartridge
pins will not fit into the holes on the carriage. Push back the ink
cartridge lock lever a in the direction of the arrow and reset the
cartridge in the correct position b.
8
Carefully replace the Imprinter Cover.
9
Gently close the Maintenance Cover until it clicks into
place.
Ink Cartridge Lock Lever
If the cartridge does not
load properly, see step 7.
Ink Cartridge
Pins
Ink Cartridge
Holes