Canon imageRUNNER Printer User Manual


 
Canon imageRUNNER Knowledge Module for PATROL 5
Verify the folder in which PATROL is installed.
Canon KM must be installed on each system with PATROL Agent or
Console. Although the system should detect the appropriate folder
automatically when you install Canon KM, you need to make certain
that Canon KM is installed in the same folder as PATROL.
Installing the Canon KM Software 0
After you have completed the initial preparations, you are ready to begin
the installation of the Canon KM software. After the installation, you
need to load the Canon printer knowledge module into PATROL.
To install the Canon KM software:
1. Insert the installation disk into your disk drive.
2. On the installation disk, run setup.exe.
3. When the installation wizard appears, follow the on-screen
instructions.
When prompted, make sure the folder containing the installation of
PATROL is specified for the installation of the Canon KM software.
4. If prompted, restart your system.
The installation program determines if your system needs to be
restarted before the Canon KM software can operate properly.
To load the Canon printer knowledge module:
1. Open the PATROL Operator Console.
2. On the File menu, click Load KM.
3. In the Load KM dialog box, click Canon_Printer.kml. Then, click
Open.
You can view the loaded knowledge module on the KM tab.
guide.book Page 5 Friday, January 25, 2002 4:01 PM