Canon IP4200 Printer Accessories User Manual


 
3Installation Procedures:
1) First step
Put the CIS at the right side of printer Take off the rubbers from ink tanks Put the Air-filter into the Air-hole
And make sure the tube line does not Air-hole.
twist.
2) Install chips
Carefully remove the original chips Pay attention when you remove original Finished.
from original cartridges as the picture chips. Make sure that the chips are not
shows. damaged.
Put some glue on the chip position of Then stick original chips according to Do the same for the other cartridges.
CISS cartridge. color of cartridges. Please make sure
that the chips number matches
cartridge number.
3) Install cartridges
Attache the support arm on the proper Then put the CISS cartridges into printer Please make sure that every cartridge is
position as the picture shown above. well installed according to the color label.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn