Canon LV-7105 Projector User Manual


 
32
SETTING
SETTING MENU
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING and press the SELECT button. Another dialog
box SETTING MENU will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the
SELECT button to set it "On" or "Off" or press the
POINT LEFT/RIGHT button to adjust the value.
1
2
Blue back
When this function is On, this projector will produce a blue image
instead of the video noise on the screen when the input source is
unplugged or turned off.
Display
This function decides whether to display the On-Screen Displays
(except ON-SCREEN MENU).
Set On1 to show all the On-Screen Displays.
Set On2 to show the On-Screen Displays except the Preparation
Display (Our Logo).
Set Off to set the On-Screen Displays below disappeared.
Preparation Display (Our Logo and the Number-counting-
down Display)
Mode Display (Computer / Video)
Volume/Mute Displays
Normal Display
No show Display
Keystone Display
True Display
D.Zoom Display
Press the POINT
RIGHT / LEFT button
to adjust the volume.
Ceiling
When this function is On, the top / bottom and the left / right
reversed picture is provided to project the image from a ceiling
mounted projector.
Rear
When this function is On, the left / right reversed picture is provided
to project the image to a rear projection screen.
Ceiling function
Rear function
Volume
Press POINT LEFT button to decrease volume, and press POINT
RIGHT button to increase the volume. (From 0 to 63.)
The sound volume can be also adjusted by pressing the VOLUME
(+/) button on the remote control unit. (Refer to page 21)
Mute
Set On to mute the sound. To restore the sound, set Off or press
the MUTE button or the VOLUME (+/) button on the remote control
unit.
The mute can be also set by pressing the MUTE button on the
remote control unit. (Refer to page 21)
Indicates the level
of the volume.
Move the arrow to the
item and then press
the SELECT button.
Closes Setting MENU.