Filter
Top Products
15
ENGLISH
Controls and functions
Projector
6. MENU
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings. See "Using the menus" on page 29
for details.
7. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high. See "Indicators" on page 65 for
details.
8. LAMP indicator light
Indicates the status of the lamp. Lights up or
flashes when the lamp has developed a problem.
See "Indicators" on page 65 for details.
9. AUTO PC
Automatically determines the best picture timings
for the displayed image. See "Auto-adjusting the
image" on page 33 for details.
10. Keystone/Arrow keys ( / Up, / Down)
Manually corrects distorted images resulting from
an angled projection. See "Correcting keystone" on
page 34 for details.
11. Right/
Activates panel key lock. See "Locking control
keys" on page 41 for details.
When the On-Screen Display (OSD) menu is
activated, the #4, #10, and #11 keys are used as
directional arrows to select the desired menu items
and to make adjustments. See "Using the menus"
on page 29 for details.
12. INPUT
Displays the source selection bar. See "Switching
input signal" on page 32 for details.
1. Focus ring
Adjusts the focus of the projected image. See
"Fine-tuning the image clarity" on page 33 for
details.
2. POWER indicator light
Lights up or flashes when the projector is under
operation. See "Indicators" on page 65 for details.
3. POWER (ON/STANDBY)
Toggles the projector between standby mode and
on. See "Starting up the projector" on page 28 and
"Shutting down the projector" on page 42 for
details.
4. Left/BLANK
Used to hide the screen picture. See "Hiding the
image" on page 41 for details.
5. OK/IMAGE
Enacts the selected On-Screen Display (OSD)
menu item.
Selects an available picture setup mode. See
"Selecting a image mode" on page 37 for details.
1
5
2
3
4
6
7
8
9
10
10
11
12
I
I