Filter
Top Products
4 5
E
F
G
63
B
C
D
5
1 Preparation
Insert the power cord into the
connector on the left side at the
back of the machine and into the
walloutletrmly.
Do NOT connect the USB
cable or Ethernet cable at this
stage.
Make sure that the Document
Cover (D) is closed.
•
•
Press the LCD open button (E) (1),
then adjust the LCD (Liquid Crystal
Display) (F) to a comfortable
viewing angle (2).
Press the ON button (G).
The machine may make some
operating noises. This is
normal operation.
It takes about 4 seconds for
the ON button to work after the
power cord is plugged in.
•
•
Unlock the scanner.
1. Open the Document Cover (B).
2. Move the Scanner Lock Switch (C)
towards the release mark to unlock
the Scanning Unit (Cover).
3. Close the Document Cover.
Make sure that the Document Cover
is closed and go to the next step.