7
(B)
4
53
Install all the other ink tanks in the same
way.
Install all the ink tanks.
Close the Scanning Unit (Cover) (B).
Wait until the screen above appears (about 6
minutes) and go to the next step.
The machine may make some operating noises
when preparing to print. This is normal operation.
•
•
Once you have installed the ink tanks, do not
remove them unnecessarily.
•
Make sure all the Ink lamp lights red.•
For your safety, always grip as illustrated.•
If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.
•
Press the PUSH mark on the ink tank until
it clicks into place.
Make sure the Ink lamp lights red.
Install the Ink Tank
Be sure to install it in a well-lit environment.•
Match the labels when installing.•
