Filter
Top Products
Adding Your Multifunction to Your Network
11
Step Three
Select Confirm LAN settings, then press the OK button.
Step Four
Select WLAN setting list, then press the OK button.
Make sure that Connection is set to Active, and then press the
Copy button to return to standby.
It may take a while before the connection is complete. In this
case, press the Back* button and wait for about a minute, then
display the Wireless LAN setting list screen again.
*Back button location varies depending on model.
NOTE: If the communication status does not improve, make
sure of the following.
• The machine and network device are turned on.
• There is no obstacle between the machine and access point,
and wireless communication is possible.
• There is no microwave, refrigerator or any other object that
may cause radio interference nearby.