Filter
Top Products
E-12
Display as recurring decimal: f
Return to initial display format (Norm 1): f
Conditions for Displaying a Calculation Result as a
Recurring Decimal
If a calculation result satisfies the following conditions, pressing f will
display it as a recurring decimal value.
• The total number of digits used in the mixed fraction (including integer,
numerator, denominator, and separator symbol) must be no more than 10.
• The data size of value to be displayed as the recurring decimal must be no
larger than 99 bytes. Each value and the decimal point require one byte,
and each digit of the period requires one byte. The following, for example,
would require of total of 8 bytes (4 bytes for the values, 1 byte for the decimal
point, 3 bytes for the period): 0.123
Note: For information about switching the display format of a calculation
result when OFF is selected for the Rdec setting on the setup menu, see
“Toggling Calculation Results”.
Recurring Decimal Examples
0.3 + 0.45 = 0.78 B
0 .a!( k ) 3 e+
0 .a!( k ) 45 =f
1.6 + 2.8 = 4.5 B
1 .a!( k ) 6 e+
2 .a!( k ) 8 =f
To confirm the following: 0.123 =
999
123
, 0.1234 =
9999
1234
,
0.12345 =
99999
12345
B
123 ' 999 =f
1234 ' 9999 =f
12345 ' 99999 =f
Math
Math
Math
Math
Math