Casio fx-85ES Calculator User Manual


 
E-44
Technical Information
k Calculation Priority Sequence
The calculator performs calculations according to a calculation priority sequence.
Basically, calculations are performed from left to right.
•Expressions within parentheses have the highest priority.
The following shows the priority sequence for each individual command.
1. Function with parentheses:
Pol(, Rec(
sin(, cos(, tan(, sin
–1
(, cos
–1
(, tan
–1
(, sinh(, cosh(, tanh(, sinh
–1
(, cosh
–1
(,
tanh
–1
(
log(, ln(, e^(, 10^(, '(,
3
'(
Abs(
Rnd(
2. Functions preceded by values, powers, power roots:
x
2
, x
3
, x
–1
, x!, ° ’ ”, °,
r
,
g
, ^(,
x
'(
Percent %
3. Fractions: a
b
/c
4. Prefix symbol: (–) (negative sign)
5. Statistical estimated value calculation: m, n, m1, m2
6. Permutations, combinations: nPr, nCr
7. Multiplication and division: ×, ÷
Multiplication where sign is omitted: Multiplication sign omitted immediately
before π, e, variables (2π, 5A, πA, etc.), functions with parentheses (2'(3),
Asin(30), etc.)
8. Addition and subtraction: +, –
If a calculation contains a negative value, you may need to enclose the negative
value in parentheses. If you want to square the value –2, for example, you need to
input: (–2)
2
. This is because x
2
is a function preceded by a value (Priority 2,
above), whose priority is greater than the negative sign, which is a prefix symbol
(Priority 4).
Example:
y2w= –2
2
= –4
(y2)w= (–2)
2
= 4
Multiplication and division, and multiplication where the sign is omitted are the
same priority (Priority 7), so these operations are performed from left to right
when both types are mixed in the same calculation. Enclosing an operation within
parentheses causes it to be performed first, so the use of parentheses can result
in different calculation results.
Example:
1/215(π)= 1 ÷ 2π = 1.570796327
1/(215(π))= 1 ÷ (2π) = 0.1591549431