Filter
Top Products
E-23
Handling the USB and Charging Unit (HA-J65US)
Mount the USB and Charging Unit on the terminal when using the unit to charge the
battery pack in the terminal or when connecting the terminal to another USB device
using the optional cable (HA-J81USBH).
Mounting the USB and Charging Unit
1.
Fit the USB and Charging Unit onto the bottom of the terminal as shown in the illustration.
2. After mounting the unit onto the terminal, check that it is fi rmly locked in place using
the stoppers.
Stoppers
Important!
The USB and Charging Unit can only be mounted on the terminal in one direction. Do not use
excessive force to attempt to push the terminal into the unit when it is facing the wrong way.
Water or other liquids on the power supply/data communication terminals on
the USB and Charging Unit or terminal can lead to an electric shock or fi re. Note
also that soiling on the terminals will impair the connection, leading to reduced
charging functionality. As a safety precaution, disconnect the AC adaptor and USB
cable before cleaning the power supply terminals with a dry cloth or cotton bud.
Never short-circuit the power supply/data communication terminals on the USB
and Charging Unit or terminal as this could cause a fault.
If the neck strap is attached to the terminal, take care not to trap it when mounting
the USB and Charging Unit. If you are having diffi culties mounting the USB and
Charging Unit, attach the neck strap using the strap hole on the top of the terminal.
•
•
•
•