Casio MA0505-EA Clock User Manual


  Open as PDF
of 3
 
Operation Guide DQ-745/PQ-65
2
GENERAL GUIDE
11
11
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
22
22
2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
33
33
3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
44
44
4
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
55
55
5 SET button
Use this button when setting the current time.
66
66
6 RESET button
Press this button to reset the clock after replacing its batteries.
77
77
7 SOUND Selector (DQ-745 only)
Use this selector to select the alarm volume.
• Buttons marked “INVALID” have no function.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting ScreenMonth and Day Setting ScreenYear Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.
ALARM SET
Press
+
to
increase
the flashing
digits.
Press
–
to
decrease
the flashing
digits.
Press
+
to
increase
the flashing
digits.
Press
–
to
decrease
the flashing
digits.
DQ-745 PQ-65
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting.
• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour
and 24-hour timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Alarm Mode selector
SNZ
ON
OFF
Description
The alarm sounds at the preset time for one minute, and up to seven more times
every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/
LIGHT button (1), the alarm sounds again five minutes later.
• The indicator
flashes on the display to indicate that the snooze feature is
activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to
select the snooze alarm feature.
Setting the Alarm Time
Use the + and – buttons (3) to set the alarm time.
Pressing the + and – buttons (3) causes the alarm time to appear in place of the date on the display.
ALARM SET
Press
+
to
change the
alarm time
setting.
Press
–
to
change the
alarm time
setting.
Press
+
to
change the
alarm time
setting.
Press
–
to
change the
alarm time
setting.
PQ-65DQ-745
• Holding down + or – changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.
• The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.
• The light also turns on for the first four seconds that the alarm sounds.
• The alarm sound changes over four levels as it sounds.
Stopping the Alarm
• When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
• To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
USING THE LIGHT
Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.
Important!
• Overuse of the light can shorten battery life.
 previous