Filter
Top Products
18
Configuring Security Settings for a Wireless LAN
Connection
Configuring security settings prevents unauthorized access to a computer or projector over the
wireless LAN. Settings are configured with the projectors System Admin page, which can be accessed
with a computer’s web browser.
This section explains only the security settings of System Admin page. For details about other System
Admin page operations, see “System Admin Page Operations and Settings” (page 32).
To configure security settings, you first need to establish a wireless LAN connection between the
projector and computer. For information about establishing a connection between a projector that
does not have security settings configured and computer, see “Using a Default SSID to Connect a
Computer to the Projector via Wireless LAN” (page 13).
Security Setting Flow
Establishing a wireless LAN connection between the projector and computer
On the computer, log in to the projector’s System Admin page.
On the System Admin page, select “Setup” and then “Wireless Setup”,
and configure the following settings.
Apply (register) the above settings to the projector.
(At this time the wireless LAN connection between the projector and computer will be terminated.)
Click the Wireless Connection 3 [Reconnect] button. On the dialog box that appears, enter the
passphrase (or WEP key).
This will establish a wireless LAN connection provided with security in accordance with the
selected protocol.
Assign a new SSID to the projector.
Select a security protocol (WPA-PSK, WPA2-PSK, or WEP).
Enter the passphrase (or WEP key).