Casio XJ-A246 Projector User Manual


 
29
To project a movie file
1.
Connect the memory device where the movie file you want to project is stored to
the Data Projector.
z This will project the main Viewer window. If the main Viewer window does not appear, press
the [INPUT] key and select “USB” as the input source.
2.
Use the cursor keys to move the highlighting to “Movie” and then press the
[ENTER] key.
z This will project a file menu like the one shown below.
z If the movie file you want to play back is located in a particular folder, use the cursor keys to
move the highlighting to that folder and then press the [ENTER] key.
3.
Use the cursor keys to move the highlighting to the movie file you want to play
back and then press the [ENTER] key (or the [O] key).
z This will start playback of the selected movie file.
4.
Perform pause and other operations as required.
z For details about operations you can perform during projection of a movie file, see
“Operations during Movie File Projection” (page 30).
z To stop movie file playback and return to the file menu, press the [ESC] key.
z When playback reaches the end of the movie file, the projection image will show a still image
of the final movie frame.
5.
To return to the file menu after movie playback is complete, press the [ESC] key.