Filter
Top Products
24
Input Settings Main Menu
Setting Name Input
Setting
Unit
Description
COMPUTER
Te rmi nal
RCUVN Single Use this sub-menu to specify manually the type of signal
being input from the projector’s COMPUTER terminal.
Auto*:
Automatically detects the signal being input from the
COMPUTER terminal and configures the appropriate input
protocol.
RGB:
Select this option when a computer is connected to the
COMPUTER terminal. For details about connecting a
computer, see “Connecting a Computer to the Projector”
in the “User’s Guide (Basic Operation)”.
Component:
Select this setting when the projector’s COMPUTER
terminal is connected to the component video output
terminal of a video device using an optionally available
YK-3 component video cable. For information about
connection, see “Connecting to a Component Video
Output Device” in the “User’s Guide (Basic Operation)”.
Video Signal RCVUN Single Use this sub-menu to specify manually the type of signal
being input from the projector’s AV terminal.
Auto*:
Select this setting to have the projector switch the video
signal system automatically in accordance with the input
signal from the video device that is connected to the AV
terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 /
SECAM:
Each setting selects the applicable video system. Use
these settings when you want to specify only one specific
video signal for the AV terminal.
Signal Name
Indicator
RCVUN Single Use this sub-menu to specify whether or not the name of
the currently selected signal source should be displayed in
the projected image.
On*:
Select this option to turn on display of the name of the
currently selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source
name.
Restore Menu
Defaults
RCVUN Source
Specific
Use this sub-menu to return all of the sub-menu items on
the Input Settings main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z Note that the “Signal Name Indicator” setting is always
returned to its initial default, regardless of the currently
selected input source.