Filter
Top Products
52
Establishing a Wireless LAN Connection with a Single
Computer Using a Simple Connection
To establish a wireless LAN connection between a single computer and the
YP-100
Note
The following explains the simplest type of connection. It shows how to use the YP-
100’s built-in connection profile named “Simple Connection 1” to establish a wireless
LAN connection with a single computer.
1
Connect the AC adaptor that comes with the YP-100 to the AC adaptor terminal,
and plug the AC adaptor into a power outlet.
z This will cause the YP-100 to turn on automatically.
z This will cause the YP-100’s [POWER] indicator to light green. The YP-100 logo screen
also will be projected by the connected projector.
2
Connect the CASIO YW-2 wireless adapter to the YP-100’s USB port.
z You could also turn on the YP-100 with the wireless adapter already connected to the
USB port.
z The
YP-100 will detect the wireless adapter and start up its Wireless function
automatically. The message shown below will appear in the projection area.
3
Turn on your computer and start up Windows.
4
If your computer is already connected to a network, disable the connection.
z On the Windows Control Panel, click “Network Connections” (“Network and Dial-up
Connection” in the case of Windows 2000). If “Local Area Connection”, “Wireless Network
Connection” or “Network Bridge” is displayed on the window that appears, right-click the
icon and then click “Disable” on the dialog box that appears.
Check to make sure that “Simple
Connection 1” is shown.