Filter
Top Products
9
Connecting a USB Device to the YP-100
What happens when you connect a USB device to the YP-100 depends on whether you
connect them and then turn on the YP-100, or whether the YP-100 is already on when
you connect them.
Turning On the YP-100 after Connecting a USB Device
The YP-100 will perform the following operations if you turn it on while a USB device is
connected to its USB port.
Connecting to a USB Device while the YP-100 is On
The YP-100 will perform the following operations if you connect a USB device to its USB
port while it is turned on.
When this type of
device is connected:
The YP-100 does this automatically when turned on:
USB memory device
Starts up Viewer (page 29) and projects the Viewer screen from the
projector connected to the YP-100.
YW-2 Wireless Adapter
Starts up Wireless (page 49) and projects the Wireless screen from the
projector connected to the YP-100.
YC-400 Document
Camera
The YC-400 Document Camera is not detected automatically, so the
message “Connect a USB device.” appears in the projection area.
When this type of
device is connected:
The YP-100 does this automatically:
USB memory device
Starts up Viewer (page 29) and projects the Viewer screen from the
projector connected to the YP-100.
YW-2 Wireless Adapter
Starts up Wireless (page 49) and projects the Wireless screen from the
projector connected to the YP-100.
YC-400 Document
Camera
When the YC-400 Document Camera is turned on, the YP-100 will start
up the YC Camera application (page 95) and then project the YC
Camera application screen from the projector connected to the YP-100.