Filter
Top Products
64
This section explains how to configure advanced settings for a wireless LAN connection
between the
YP-100 and a computer.
z All of the operations in this section assume that you have already configured the settings
under “Wireless LAN Connection Basics” (page 51).
z For details about projection operations after establishing a connection, see “Using Wireless
LAN for Projection” (page 90).
Web Setup
In order to modify the settings of a YP-100 manual setup profile and to configure
advanced settings of other
YP-100 settings, you need first to display a special web browser
page named “Web Setup” on you computer screen. To display Web Setup, use a web
browser running on a computer that is connected to the
YP-100 over a wireless LAN.
To display and log into the Web Setup page
1
Use the Simple Connection profile to establish a wireless LAN connection
between a computer and the YP-100.
z See “Establishing a Wireless LAN Connection with a Single Computer Using a Simple
Connection” on page 52 for more information.
z If a Simple Connection is already established between the first computer and the YP-100,
proceed to step 2.
2
On the Wireless Connection window of the computer, click the button.
z This will start up the computer’s default browser and display an initial page like the one
shown below.
z The Web Setup page may not appear if your browser is running already. In this case,
quit the browser and then click the button again.
Advanced Wireless LAN Connection Settings