Filter
Top Products
— 100 —
GS H n
[Function] Selecting of printing position of HRI characters
[Code] <1D>H<48>H<n>
[Range] 0
n 3
48
n 51
[Outline] Selecting printing position of HRI characters in printing
bar codes.
• “n” means the followings.
n Printing Position
0,48 No printing
1,49 Above the bar code
2,50 Below the bar code
3,51 Both above and below the bar code
[Caution] • The HRI characters refer to the bar code-turned characters so
that you can read them.
• The HRI characters are printed in the font selected with GS f.
• Specify before the GS k command.
[Default] n = 0
[See Also] GS f, GS k
[Sample Program]
LPRINT CHR$(&H1B) + “3” + CHR$(5);
LPRINT CHR$(&H1D) + “h” + CHR$(50);
LPRINT CHR$(&H1D) + “H” + CHR$(0);
GOSUB BC
LPRINT CHR$(&H1D) + “H” + CHR$(1);
GOSUB BC
LPRINT CHR$(&H1D) + “H” + CHR$(2);
GOSUB BC
LPRINT CHR$(&H1D) + “H” + CHR$(3);
GOSUB BC
END
BC:
LPRINT CHR$(&H1D) + “k”;
LPRINT CHR$(4);
LPRINT “12” + CHR$(0);
LPRINT CHR$(&HA);
RETURN