Filter
Top Products
EN SlimPAR™ 64 QRG
3
Product
Description
The SlimPAR™ 64 is an LED Par that can go almost anywhere. It has 180
Red, Green, and Blue LEDs with 3- or 7-
channel DMX control and can be
operated with the Satellite™ battery pack for ultra-portability.
Overview
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 40 SlimPAR™ 64 products at 120 VAC or up to 60
units at 230 VAC.
Fuse Replacement
To replace the F1A, 250 V fuse in the SlimPAR™ 64:
Disconnect the product from power. 1.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder. 2.
Pry the safety cap out of the housing. 3.
Remove the blown fuse from the clip on the front of the safety cap and 4.
replace with a fuse of the exact same type and rating.
Re-insert the fuse holder and reconnect power. 5.
Bracket
Adjustment
Knob
Back Panel View
Power In
Satellite™ 12 V
Input
Fuse
Holder
Control Panel
LED Display
Power Out
Microphone Sensitivity
Adjustment Knob